LED strobe ED3706

SKU: BL-1833-37525
Variante wählen:
LED strobe ED3706
12-24 V, red, ECE road approval (Reg. 65)

The strobe ED3706 is technically comparable with the XTSlim series, but here a higher-quality housing made of die-cast aluminum was used. This light has 21 different strobe patterns that can be synchronized with identical modules. The 6 high-power LEDs provide maximum brightness, which is emitted over a large area.

The directional strobe can be easily mounted on a flat surface. In addition, the delivery includes an tilt bracket and special brackets for mounting the light on an edge.

ED3706 is available in five different colors (amber, blue, white, green and red), is sealed to IP67 and has road approval according to ECE regulation 65.

Datenblatt
Datenblatt (PDF)
Kennzeichen
Load capacity [A] 0.9
Temperature range [° C] -30 to 50
Protection class IP67
Resilience SAE J595 , ECE (Reg. 65)
EMC (electromagnetic compatibility) ECE (Reg. 10)
Leistung
Brightness SAE Cl. I
Frequency, revolutions [Hz, rpm, fpm] 21 different strobe modes
Sonstiges
Material (housing) Aluminum
Material (lens) Polycarbonate
Colour (housing) Black
Colour (lens Clear
kabelbelegung
kabelbschwarz Ground
kabelbrot Strobe
kabelbgelb Synchronizing
kabelbblau Modus
lichtfarbe
lichtfarberot 1
Montage
Connector Bare wire leads
Reverse polarity protection 0
Mounting Surface mount, adhesive, spec. mounting bracket
Installation dimensions / diameter [mm]
Installation depth [mm]
Socket
Mating connector
+49 40 303300-0 info@jfuehr.com Contact
LinkedIn Instagram Youtube
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.